$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
1 x Part NV036A Click On Picture For Information (Qty 5 Per Order)
1 x Part NM005A Cord Tilter Fits Hex Rod
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x Part NV036 Click On Picture For Information (Qty 4 Per Order)
1 x YNP01A Right Side Cord lock (White Only)
1 x YNP01EF-Metal Cord Guide
1 x Part 26 Large Installation Bracket (screws not included)
1 x Part- NM019C (Qty. 4) White Plastic Wand 36"(no returns)
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x ANP11A - Vanilla Left Side Lock Body
1 x Part- NM087 Mini Blind Bottom Rail Plug
1 x Part NM043A-Loop Type Wand Tilter
1 x Part NV002B Vertical Track End Control Notchless
1 x Part NM041E Clip For 2 1/2" Valance (Quantity 15)
1 x Part NM003AA- Cord Lock for 2" Blind
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part- NM009B White Wood Tassel 1 1/4" Tall (20 per order)
1 x Part NM012C-2" (Discontinued) A Compatible Tilter Will Ship Out
1 x Part NM007- Cord Tilter For 2 Inch Blind (Fits Low Prof
1 x Part NP06- Right Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part NM003D Wand Tilter For 3" Slat, Fits Square Rod
1 x Part NM012- 2" Wand Tilter For Low Profile
1 x Part NP03E-Clear Plastic Stopball (Qty 10)
1 x #1.8 mm cord size (click here for more information)
1 x Part NM003 -Wand Tilter For 2 Inch Blind
1 x Part NP37A- Motor Lock
1 x Part NP16A- Plug For Easy Rise Tape
1 x #0.9mm-Q-Black Shade Cord (75 Feet Per Order)
1 x Part NM041D Clip For 3 1/4" Valance (Quantity 15)
1 x Part NM003BB1-Hunter Douglas Compatible Ships Out
1 x #1.8mm-C-Vanilla Blind Cord (75 Feet Per Order)
1 x Part NV021B - Decomatic Black Lock Washer
1 x Part NV038 Vertical Track Carrier (Qty 1 Per Order)
1 x Part NM031C-1" Wand Tilter A
1 x #1.8mm-K-Black Blind Cord (75 Feet Per Order)
1 x Part NM027- Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x Part NM027- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NV030- Valance Corner
1 x Part NP02- C Clamp For Cord Loop System
1 x YNP01D-Right Del Mar Green Lock
1 x Part NP66L Black Motor Left Side (no returns or refunds)
1 x Part NP03D Plastic Washer 1/4" Outside Diameter
1 x Part NM040G- Valance Clip (Quantity 15)
1 x Part NM013B-2" Wand Tilt Fits Hex Rod(new version will ship out)
1 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
1 x Part NP07A Wear Bar
1 x Part 34 Installation Bracket
1 x #2.7 mm cord size (click here for more information)
1 x Part- NM084 White Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NV037 Click On Picture For Information(Qty 5 Per Order)
1 x Part 07- Installation Bracket (screws not included)
1 x #0.9mm-B1-Alabaster Shade Cord(75 Feet Per Order)
1 x Part NV029-(Qty 7) Valance Clip Fits On Top Of A 1 7/8" Headrai
1 x Part NP70 Vista lock only for part NP68-69, I use 0.9 cord
1 x Part NP36C Off White Plastic Plug
1 x Part NM024- Mini Blind Cord Lock
1 x Part 30A Brown Bracket LP (screws not included)
1 x #2.7mm-A11- Alabaster Blind Cord (50 Feet Per Order)
1 x #1.2mm-A-White Blind Cord (75 Feet Per Order)
1 x Part NP10A- Cord Guide 1 3/4" Wide
1 x Part NM013D Wand Tilter
1 x Part NM039-Barrel and Cradle For 1" Blind
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NP39- Tan Motor For Cordless Blind(no returns)
1 x Part NM038D - 1" Wand Tilter
1 x #2.7mm-E-Dark Walnut Cord(50 Feet Per Order)
1 x Part NM013C- 2" Wand Tilter
1 x Part NP72F-Vanilla Left Side End Cap
1 x Part NM043C -Not Available (Compatible Tilter Will Ship Out)
1 x Part 32A Vertical Track Bracket
1 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
1 x Part NV029H-(Qty 5) Valance Clip
1 x Part NV029G-(Qty 4) Valance Clip
1 x Part NP62 cord guide
1 x Part NV030A- Valance Corner
1 x #0- 0.9mm Cord Size and Safety (click here for more information
1 x Part SVS6 White End Cap(1 pair)
1 x #2.7mm-B-Oak Blind Cord (50 Feet Per Order)
1 x Part 36 Pleated Shade Bracket (1)
1 x Part NM041A Clip For 2 1/2" Wood Valance (Quantity 15)
1 x Part NP06A- Left Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part NP71A-Left Side Blue Cord Clutch
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x ANP10A - White Right Side Body Cover
1 x ANP11B - White Left Side Lock Body
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NV014A- White Vertical Repair Clip
1 x ANP09-Hunter Douglas Large Pleat Cord Lock Left, Use 0.9mm Cord
1 x Part NV002A2 (Qty 5) Carrier With Plastic Scissors Blue Wheels
1 x #2.2mm*Vertical Track Cord* (50 Feet Per Order)
1 x YNP01E-Del Mar Vanilla Left Side
1 x #1.8mm-I-Medium Walnut Cord (75 Feet Per Order)
1 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
1 x YNP01B Left Side Cord lock (White only)
1 x Part NP06B- Off White/Vanilla Cover For Small Lock
1 x Part NV001-100 Clips(no returns)
1 x Part NM041B 3" Valance Clip For Wood Valance (Quantity 15)
1 x Part NR01 (Qty10)Brown Cord Lock 3 Guides (screws not included)
1 x Part NP76 Grey Motor (no returns)
1 x Part NP16B Tape Only (160 feet)
1 x Part NP05A Cord Wedge
1 x #1.4mm-F-Oak Blind Cord(75 Feet Per Order)
1 x Part NP72I White Right Cord Clutch Cover
1 x Part NP71 Off White Left Cord Clutch Cover
1 x Part NM013- 2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NV023- Vertical End Cap
1 x Part NM040J- Valance Clip (Quantity 15)
1 x Part NM034- 1" Tilter Fit Hex Rod With Groove
1 x Part NR09A Small Cord Guide (screws not included)
1 x Part NM032A Replacement Hook 1" Tall (Quantity10)
1 x Part NV014- Silver Vertical Repair Clip
1 x #1.4mm-H-Medium Walnut Cord(75 Feet Per Order)
1 x Part NP06D-Left Side Side Large Cord Lock, Uses 1.2mm Cord
1 x Part NV023A-(Qty 3)Decomatic Vertical Carrier
1 x Part NV004A- Plastic Link For Carrier 3 5/16" Long
1 x White Cord Loop B (4 Feet Tall) Click Here For More Information
1 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
1 x Part- NM081 Dark Walnut Plug For 3/8" Hole(Qty. 20 Plugs)
1 x Part NV002D - Wand Control
1 x Part- NM057-Barrel For Hex Rod (Quantity 4)
1 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM038-White Wand Tilter For 1" Blind(new version ships out)
1 x Part 33A Vertical Track Bracket
1 x Part NM005D Cord Tilter For 2" Blind
1 x Part NP27-Cream Left Side Cord Lock, Uses 1.2mm Cord
1 x Part NV005- Carrier Uses Plastic Link
1 x Part NV013-(Qty 2) Vertical Cord Hold Down (screws not included)
1 x Part NM012A Cord Tilter High Profile
1 x Part NR08 Plastic Sew On Ring 5/8"
1 x Part NR09 Cord Guide (screws not included)
1 x Part NP03H- Cord Tassel Clear Plastic 3/4" Tall
1 x Part NV007- Vertical Track Kirsch Carrier(Salvaged Part)
1 x #1.8mm-J-Dark Walnut Cord (75 Feet Per Order)
1 x #1.4mm-D-Sand Blind Cord (75 Feet Per Order)
1 x Part NP67A- Right Side White Motor (no returns or refunds)
1 x #0.9mm-N-Dark Brown Cord (75 Feet Per Order)
1 x #1.8mm-D-Sand Blind Cord(75 Feet Per Order)
1 x Part NV002A3 (Qty 2) Carrier With Plastic Scissors White Wheels
1 x Part NM004C-Cord Tilter Fits Hex Rod
1 x #1.4mm-C-Vanilla Blind Cord (75 Feet Per Order)
1 x Part NV002 Vertical Track End Control
1 x Part- NM009C2 Light Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x #1.4mm-A-White Blind Cord (75 Feet Per Order)
1 x Part NR02- (Qty 6) Roman Shade Lock- 3 guides(screws not include
1 x Part NM003BB- Hunter Douglas (Compatible Part Ships Out)
1 x Part NP72D-Off White Right Side End Cap
1 x Part NV023C-(Qty 2)Vertical Clip And Base
1 x Part NM037 Cord Tilter For 1" Blind
1 x Part NP36B White Plastic Plug
1 x #0.9mm-F11-Smokey Gray Shade Cord (75 Feet Per Order)
1 x #White CordLoop A - 6 Feet Tall -Click Here For More Information
1 x #2.7mm-A3- Sand Blind Cord (50 Feet Per Order)
1 x Part- NM009H2 -Wand Tip and Hook (Quantity 12)
1 x Part NP38- Gray Motor For Cordless Blind(no returns)
1 x Part NV031B-Metal Link For 3dayblind Carrier
1 x Part NP65L Blue Motor Left Side (no returns or refunds)
1 x #2.7mm-D-Medium Walnut Cord (50 Feet Per Order)
1 x Part SVS92 White End Cap(1 pair)
1 x Part NP06E- Off White/Vanilla Cover For Large Cord Lock
1 x Part- NM016a-(Qty. 4)Clear Plastic Wand 30"(no returns)
1 x Part NM041G Valance Clip 2" Tall (Quantity 15)
1 x #1.8mm-H-Oak Blind Cord (75 Feet Per Order)
1 x Part NV009A- Vertical End Control
1 x Part NM017 Cord Tilter Fits Square Rod
1 x #0.9mm-H-Peach Blush Cord(75 Feet Per Order)
1 x Part NM036- Right Side 1 Inch Tilter
1 x Part NV031 -Replacement Stem (Qyt 1 Stem Only)
1 x #1.4mm-HH-Dark Walnut Cord(75 Feet Per Order)
1 x #1.8mm-B1-Alabaster Blind Cord(75 Feet Per Order)
1 x Part NV010- Vertical Track Sprocket (Qty 1)
1 x YNP01G-(1)Cord Guide
1 x YNP01C Left Side Cord lock (White only)
1 x Part NV003C- Clear Plastic Vertical Slat Fabric Insert
1 x Part- NM009H1 -Wand Tip (Quantity 12)
1 x Part NM027B- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NM038E - 1" Wand Tilter
1 x Part 07A- (Qty 1) Pleated Shade Bracket (screws not included)
1 x Part NM005-Cord Tilter Fits Hex Rod
1 x Part NV021a- Vertical Stopper
1 x Part NP63L Green Motor Left Side (no returns or refunds)
1 x Part NV034 Luminette End Control Stem and Gear
1 x Part NP72E Plastic Threaded Rod 4 1/2" Long
1 x Part NM040H- Valance Clip (Quantity 14)
1 x Part NM005B Cord Tilter Fits Hex Rod
1 x #0.9mm-C-Vanilla Shade Cord(75 Feet Per Order)
1 x Part NM038C - 1' Wand Tilter
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NV012B1- Plastic Link
1 x Part NP75 White Motor (no returns)
1 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM042- White Wand Tilter 2" With Hook
1 x Part NV002-Discontinued (A Compatible Control) Will Ship Out
1 x Part- NM052 Levolor Mini Blind Cord Lock
1 x #2.7mm-A-White Blind Cord (50 Feet Per Order)
1 x Part NM011D-(Qty. 5 pair) Hold Down Bracket
1 x Part NV003- Graber Small Vertical Track End Control
1 x Part NV008- Vertical Track Kirsch Carrier For Vinyl Vanes
1 x #0.9mm-G-Pink Shade Cord(75 Feet Per Order)
1 x Part NP72B-Right Side Blue Cord Clutch
1 x Part NM004A-Discontinued (new version will ship out)
1 x ANP12-Hunter Douglas Small Pleat Cord Lock Right Side, Use 0.9mm
1 x Part NV028-(Qty 7) Clip Fits 1 1/2" Headrail
1 x Part NV002A-(Qty 5) Carrier With Plastic Scissors Black Wheels
1 x Part NM008 - Wand Tilter
1 x Part- NM083 Oak Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
1 x Part NV005B- Vertical End Cap For Hunter Douglas
1 x Part NV001A Fabric Weight
1 x Part NR03- (Qty2)Clear Plastic Bar Eyelet
1 x #1.4mm-B1-Alabaster Blind Cord (75 Feet Per Order)
1 x #0.9mm-D-Sand Shade Cord(75 Feet Per Order)
1 x Part NV029J Valance Clips 3 per Order
1 x Part NM027A- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NV004- (Qty. 50)Vertical Slat Fabric Insert 3 3/8" Wide
1 x Part NV021- Lock Washer
1 x #1.2 mm cord size (click here for more information)
1 x #V013A (Qty 25) Cord Holder (screws not included)
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap On Right Replaces Lef
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
$2,366.43
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts