$14.99

Part NP66 Right Side Black Motor (no returns or refunds)
[blinds parts]

Part NP66 Right Side Black Motor (no returns or refunds)
No longer has a belt drive, only gears. The stem is connect to the motor. Basic instructions for replacement. Remove old motor, turn the rod that has the cord on it and stack the shade up. Lay the motor on the flat side with the screw pointing toward you. If the motor is on your right side, turn the white plastic barrel clockwise 1 to 2 times and install. If on the motor is on the left side, turn it counter clockwise 1 to 2 and install.
Reviews
 
1 x Part- NM009B White Wood Tassel 1 1/4" Tall (20 per order)
1 x Part- NM009C2 Light Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NP75 White Motor (no returns)
1 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
1 x Part NV029-(Qty 7) Valance Clip Fits On Top Of A 1 7/8" Headrai
1 x YNP01C Left Side Cord lock (White only)
1 x Part NP38- Gray Motor For Cordless Blind(no returns)
1 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
1 x Part NP71A-Left Side Blue Cord Clutch
1 x Part NR03- (Qty2)Clear Plastic Bar Eyelet
1 x Part NV013-(Qty 2) Vertical Cord Hold Down (screws not included)
1 x Part NP76 Grey Motor (no returns)
1 x Part NV002A3 (Qty 2) Carrier With Plastic Scissors White Wheels
1 x Part NP63L Green Motor Left Side (no returns or refunds)
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x Part NM037 Cord Tilter For 1" Blind
1 x Part NP16A- Plug For Easy Rise Tape
1 x Part NV003- Graber Small Vertical Track End Control
1 x Part NP37A- Motor Lock
1 x Part- NM009H2 -Wand Tip and Hook (Quantity 12)
1 x Part- NM009C3 Clear Plastic Tassel 1 1/4" Tall(10 per order)
1 x Part NM008 - Wand Tilter
1 x Part NP72B-Right Side Blue Cord Clutch
1 x Part NM039-Barrel and Cradle For 1" Blind
1 x Part NV021a- Vertical Stopper
1 x Part NV002D - Wand Control
1 x Part NV010- Vertical Track Sprocket (Qty 1)
1 x Part NV008- Vertical Track Kirsch Carrier For Vinyl Vanes
1 x Part NR02- (Qty 6) Roman Shade Lock- 3 guides(screws not include
1 x Part NM004A-Discontinued (new version will ship out)
1 x Part NP03E-Clear Plastic Stopball (Qty 10)
1 x Part NV031B-Metal Link For 3dayblind Carrier
1 x Part- NM009H1 -Wand Tip (Quantity 12)
1 x Part NM005D Cord Tilter For 2" Blind
1 x YNP01EF-Metal Cord Guide
1 x Part NR09 Cord Guide (screws not included)
1 x Part NM032A Replacement Hook 1" Tall (Quantity10)
1 x Part NV034 Luminette End Control Stem and Gear
1 x Part- NM052 Levolor Mini Blind Cord Lock
1 x Part- NM083 Oak Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NP72I White Right Cord Clutch Cover
1 x Part NP02- C Clamp For Cord Loop System
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NP06- Right Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x Part NV003C- Clear Plastic Vertical Slat Fabric Insert
1 x Part NM041A Clip For 2 1/2" Wood Valance (Quantity 15)
1 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NV001-100 Clips(no returns)
1 x Part NP72D-Off White Right Side End Cap
1 x Part NM041J Valance Clip 3.5" (Quantity 15)
1 x Part NM036- Right Side 1 Inch Tilter
1 x Part NM004A-Hunter Douglas Cord Tilter
1 x Part NM043B-(Compatible Tilter Will Ship Out) Select Blinds Tilt
1 x Part NV028-(Qty 7) Clip Fits 1 1/2" Headrail
1 x Part NV036 Click On Picture For Information (Qty 4 Per Order)
1 x Part NM005-Cord Tilter Fits Hex Rod
1 x Part NV029F-(Qty 5) Valance Clip 1 1/2" Rail
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x Part NV014B- Clear Plastic Slat Repair Tab
1 x Part NV026- #10 Vertical Chain $.99 Per Foot
1 x Part NM013C- 2" Wand Tilter
1 x ANP09-Hunter Douglas Large Pleat Cord Lock Left, Use 0.9mm Cord
1 x Part NP07A Wear Bar
1 x Part NM038D - 1" Wand Tilter
1 x YNP01G-(1)Cord Guide
1 x Part NM012C- Discontinued New Version Will Ship Out
1 x Part NV023C-(Qty 2)Vertical Clip And Base
1 x Part NM007- Cord Tilter For 2 Inch Blind (Fits Low Prof
1 x Part NP66 Right Side Black Motor (no returns or refunds)
1 x Part NM005A Cord Tilter Fits Hex Rod
1 x ANP10-Hunter Douglas Large Pleat Cord Lock Right, Use 0.9mm Cord
1 x Part NM017 Cord Tilter Fits Square Rod
1 x Part NP67A- Right Side White Motor (no returns or refunds)
1 x Part NM031C-1" Wand Tilter A
1 x Part NM031D- 1" Wand Tiler With Clutch
1 x Part NP70 Vista lock only for part NP68-69, I use 0.9 cord
1 x Part NP06C- Right Side Large Cord Lock, Use 1.2mm Cord
1 x YNP01E-Del Mar Vanilla Left Side
1 x Part NV029G-(Qty 4) Valance Clip
1 x Part NM041B 3" Valance Clip For Wood Valance (Quantity 15)
1 x Part NP71 Off White Left Cord Clutch Cover
1 x Part NV030A- Valance Corner
1 x Part NV016-2.2 mm Track Cord (100 Feet per Order)
1 x Part NM006- Not Available (Compatible Tilter Will Ship Out)
1 x Part NP66L Black Motor Left Side (no returns or refunds)
1 x Part NM003BB1-Hunter Douglas Compatible Ships Out
1 x Part NV003B- (Qty 10) Graber Small Vertical Track Carrier
1 x Part NV017A-Open Bead For 2.2mm Vertical Cord
1 x Part NM041D Clip For 3 1/4" Valance (Quantity 15)
1 x Part NM046- Craddle For Low Profile (Quantity 10)
1 x ANP11A - Vanilla Left Side Lock Body
1 x Part NV014A- White Vertical Repair Clip
1 x Part- NM009C1 Medium Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM027- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM043A-Loop Type Wand Tilter
1 x Part NM012A Cord Tilter High Profile
1 x Part NM040G- Valance Clip (Quantity 15)
1 x Part NV029D (Qty 3) Valance Clip
1 x Part NV014- Silver Vertical Repair Clip
1 x Part NM003 -Wand Tilter For 2 Inch Blind
1 x Part NM034- 1" Tilter Fit Hex Rod With Groove
$1,086.28
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts