$14.99

Part NP67A- Right Side White Motor (no returns or refunds)

Part NP67A- Right Side White Motor (no returns or refunds)
No longer has a belt drive, only gears. The stem is connect to the motor. Basic instructions for replacement. Remove old motor, turn the rod that has the cord on it and stack the shade up. Lay the motor on the flat side with the screw pointing toward you. If the motor is on your right side, turn the white plastic barrel clockwise 1 to 2 times and install. If on the motor is on the left side, turn it counter clockwise 1 to 2 and install.
Reviews
Currently viewing: Part NP67A- Right Side White Motor (no returns or refunds)
 
Categories
1" & 2" Mini & Wood Blind Parts
Pleated Cellular Shade Parts
Vertical Blind Parts
Blind Cords
Window Blind Safety Information
Roman Shade and Woven Wood Parts
Blind Installation Brackets
Silhouette-Vienna-Shangri La
Information
Shipping & Returns
Repair Videos
Contact Us
Repair Charges
Cutdown Charges
Shopping Cart
1 x ANP10-Hunter Douglas Large Pleat Cord Lock Right, Use 0.9mm Cord
1 x #1.8mm-D-Sand Blind Cord(75 Feet Per Order)
1 x Part NV013-(Qty 2) Vertical Cord Hold Down (screws not included)
1 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
1 x #1.4mm-F-Oak Blind Cord(75 Feet Per Order)
1 x #0.9mm-D-Sand Shade Cord(75 Feet Per Order)
1 x Part- NM016a-(Qty. 4)Clear Plastic Wand 30"(no returns)
1 x Part NM038C - 1' Wand Tilter
1 x Part NV015- Top Plug For Vertical Fabric
1 x Part NV014A- White Vertical Repair Clip
1 x Part NM041B 3" Valance Clip For Wood Valance (Quantity 15)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NP03D Plastic Washer 1/4" Outside Diameter
1 x ANP11-Hunter Douglas Small Pleat Left Cord Lock, Use 0.9mm Cord
1 x Part NM013- 2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NV031 -Replacement Stem (Qyt 1 Stem Only)
1 x Part NM003AA- Cord Lock for 2" Blind
1 x #0- 0.9mm Cord Size and Safety (click here for more information
1 x Part- NM057-Barrel For Hex Rod (Quantity 4)
1 x Part- NM083 Oak Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM011D-(Qty. 5 pair) Hold Down Bracket
1 x Part NM043B-(Compatible Tilter Will Ship Out) Select Blinds Tilt
1 x Part NP72H-White Right Side End Cap
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap
1 x Part NP36A Clear Plastic Plug
1 x Part NV002D - Wand Control
1 x Part NM043C -Not Available (Compatible Tilter Will Ship Out)
1 x Part NV029-(Qty 7) Valance Clip Fits On Top Of A 1 7/8" Headrai
1 x YNP01G-(1)Cord Guide
1 x Part NM003BB- Hunter Douglas (Compatible Part Ships Out)
1 x Part NV008- Vertical Track Kirsch Carrier For Vinyl Vanes
1 x Part NV001-100 Clips(no returns)
1 x Part NP66L Black Motor Left Side (no returns or refunds)
1 x #0.9mm-Q-Black Shade Cord (75 Feet Per Order)
1 x Part NP02- C Clamp For Cord Loop System
1 x Part NM040G- Valance Clip (Quantity 15)
1 x Part NP05A Cord Wedge
1 x Part- NM053 Del Mar Mini Blind Cord Lock Left Side
1 x Part NM003 -Wand Tilter For 2 Inch Blind
1 x YNP01EF-Metal Cord Guide
1 x Part SVS92 White End Cap(1 pair)
1 x Part NM043A-Loop Type Wand Tilter
1 x Part NP37A- Motor Lock
1 x Part NV023- Vertical End Cap
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x Part NV004B- Plastic Link For Carrier 3 5/8" Long
1 x Part- NM087 Mini Blind Bottom Rail Plug
1 x Part NP72D-Off White Right Side End Cap
1 x Part NM041J Valance Clip 3.5" (Quantity 15)
1 x Part NM005-Cord Tilter Fits Hex Rod
1 x Part NV005- Carrier Uses Plastic Link
1 x Part NP71A-Left Side Blue Cord Clutch
1 x YNP01A Right Side Cord lock (White Only)
1 x Part NP06D-Left Side Side Large Cord Lock, Uses 1.2mm Cord
1 x Part NV009- Vertical Track Laserlite Barrel For End Control
1 x Part NV028-(Qty 7) Clip Fits 1 1/2" Headrail
1 x Part NR09C #10 Plastic Connector( Qty. 20 per Order)
1 x Part NM013C- 2" Wand Tilter
1 x Part NM035- 1 Inch Wand Tilter Left Side
1 x Part SVS6 White End Cap(1 pair)
1 x Part NP62 cord guide
1 x Part NV029H-(Qty 5) Valance Clip
1 x Part NR09B #10 Plastic Beaded Chain (100 Feet per Order)
1 x Part NM041D Clip For 3 1/4" Valance (Quantity 15)
1 x ANP09-Hunter Douglas Large Pleat Cord Lock Left, Use 0.9mm Cord
1 x Part NM032A Replacement Hook 1" Tall (Quantity10)
1 x Part NM038A - Alabaster Wand Tilter For 1" Blind
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NP06B- Off White/Vanilla Cover For Small Lock
1 x Part NV016-2.2 mm Track Cord (100 Feet per Order)
1 x #1.4mm-A-White Blind Cord (75 Feet Per Order)
1 x Part NM034- 1" Tilter Fit Hex Rod With Groove
1 x Part NV029F-(Qty 5) Valance Clip 1 1/2" Rail
1 x #2.7mm-A3- Sand Blind Cord (50 Feet Per Order)
1 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM007- Cord Tilter For 2 Inch Blind (Fits Low Prof
1 x # Threading Tool
1 x Part- NM009C3 Clear Plastic Tassel 1 1/4" Tall(10 per order)
1 x #1.8mm-C-Vanilla Blind Cord (75 Feet Per Order)
1 x #1.8mm-K-Black Blind Cord (75 Feet Per Order)
1 x Part NP36B White Plastic Plug
1 x Part NR03- (Qty2)Clear Plastic Bar Eyelet
1 x YNP01C Left Side Cord lock (White only)
1 x Part NV029J Valance Clips 3 per Order
1 x Part NM038E - 1" Wand Tilter
1 x Part NP72F-Vanilla Left Side End Cap
1 x Part NM005B Cord Tilter Fits Hex Rod
1 x Part NP06- Right Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x #0.9mm-F11-Smokey Gray Shade Cord (75 Feet Per Order)
1 x Part NV017A-Open Bead For 2.2mm Vertical Cord
1 x Part NM046-Discontinued (A Compatible Ships) (Quantity 10)
1 x Part NM041F Valance Clip 1 3/4" Tall (Quantity 15)
1 x Part NM012C- Discontinued New Version Will Ship Out
1 x Part NV030- Valance Corner
1 x Part NM027- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM027A- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NV036 Click On Picture For Information (Qty 4 Per Order)
$990.09
Notifications
NotificationsNotify me of updates to Part NP67A- Right Side White Motor (no returns or refunds)
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts