$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap On Right Replaces Lef
1 x Part NM035- 1 Inch Wand Tilter Left Side
1 x Part NP71A-Left Side Blue Cord Clutch
1 x Part NM043C -Not Available (Compatible Tilter Will Ship Out)
1 x Part NM040G- Valance Clip (Quantity 15)
1 x Part- NM009H2 -Wand Tip and Hook (Quantity 12)
1 x Part NV004A- Plastic Link For Carrier 3 5/16" Long
1 x Part NM040H- Valance Clip (Quantity 14)
1 x Part NP76 Grey Motor (no returns)
1 x Part NP08a -New style guide(you must drill out grommet to fit)
1 x Part SVS6 White End Cap(1 pair)
1 x Part NV027-#10 Vertical Chain Connector
1 x Part NV034 Luminette End Control Stem and Gear
1 x Part NP67A- Right Side White Motor (no returns or refunds)
1 x Part NP72D-Off White Right Side End Cap
1 x Part NV029-(Qty 7) Valance Clip Fits On Top Of A 1 7/8" Headrai
1 x Part NM038-White Wand Tilter For 1" Blind(new version ships out)
1 x Part 33A Vertical Track Bracket
1 x Part 36 Pleated Shade Bracket (1)
1 x Part NP72I White Right Cord Clutch Cover
1 x Part NV002A-(Qty 5) Carrier With Plastic Scissors Black Wheels
1 x Part NP06C- Right Side Large Cord Lock, Use 1.2mm Cord
1 x Part NM005D Cord Tilter For 2" Blind
1 x Part NM043B-(Compatible Tilter Will Ship Out) Select Blinds Tilt
1 x Part NP72E Plastic Threaded Rod 4 1/2" Long
1 x Part NP07- Cord Guide 1 1/4" Wide
1 x Part NP70 Vista lock only for part NP68-69, I use 0.9 cord
1 x Part- NM009C2 Light Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NV029F-(Qty 5) Valance Clip 1 1/2" Rail
1 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
1 x Part NP65L Blue Motor Left Side (no returns or refunds)
1 x Part NM042- White Wand Tilter 2" With Hook
1 x Part NM041G Valance Clip 2" Tall (Quantity 15)
1 x Part NV001A Fabric Weight
1 x Part NM041A Clip For 2 1/2" Wood Valance (Quantity 15)
1 x Part NM006-Not Available(A Compatible Tilter) will ship out
1 x Part NP72F-Vanilla Left Side End Cap
1 x Part NM004A-Discontinued (new version will ship out)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NP72B-Right Side Blue Cord Clutch
1 x Part NP03H- Cord Tassel Clear Plastic 3/4" Tall
1 x Part NM037 Cord Tilter For 1" Blind
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x Part NV029H-(Qty 5) Valance Clip
1 x #V013A (Qty 25) Cord Holder (screws not included)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NP72H-White Right Side End Cap
1 x Part NV023- Vertical End Cap
1 x Part- NM019C (Qty. 4) White Plastic Wand 36"(no returns)
1 x Part NV036 Click On Picture For Information (Qty 4 Per Order)
1 x Part NM024- Mini Blind Cord Lock
1 x Part 07- Installation Bracket (screws not included)
1 x Part NP72J White Left Cord Clutch Cover
1 x Part NM005-Cord Tilter Fits Hex Rod
1 x Part NV036A Click On Picture For Information (Qty 5 Per Order)
1 x Part NV014- Silver Vertical Repair Clip
1 x Part NV004- (Qty. 50)Vertical Slat Fabric Insert 3 3/8" Wide
1 x Part NM007- Cord Tilter For 2 Inch Blind (Fits Low Prof
1 x YNP01B Left Side Cord lock (White only)
1 x YNP01G-(1)Cord Guide
1 x Part NV014A- White Vertical Repair Clip
1 x Part NM046-Discontinued (A Compatible Ships) (Quantity 10)
1 x Part NP16A- Plug For Easy Rise Tape
1 x Part NM006- Not Available (Compatible Tilter Will Ship Out)
1 x Part NP39- Tan Motor For Cordless Blind(no returns)
1 x Part SVS92 White End Cap(1 pair)
1 x Part NV010- Vertical Track Sprocket (Qty 1)
1 x Part NV004B- Plastic Link For Carrier 3 5/8" Long
1 x Part NV021- Lock Washer
1 x Part NV029G-(Qty 4) Valance Clip
1 x Part NV002B Vertical Track End Control Notchless
1 x Part NM031C-1" Wand Tilter A
1 x Part NM032A Replacement Hook 1" Tall (Quantity10)
1 x Part- NM009C Dark Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM003BB1-Hunter Douglas Compatible Ships Out
1 x Part NP03E-Clear Plastic Stopball (Qty 10)
1 x Part NV031 -Replacement Stem (Qyt 1 Stem Only)
1 x Part NP07A Wear Bar
1 x Part NV003C- Clear Plastic Vertical Slat Fabric Insert
1 x Part NM005B Cord Tilter Fits Hex Rod
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x Part NV002-Discontinued (A Compatible Control) Will Ship Out
1 x Part- NM053 Del Mar Mini Blind Cord Lock Left Side
1 x Part NV026- #10 Vertical Chain $.99 Per Foot
1 x Part NV002A3 (Qty 2) Carrier With Plastic Scissors White Wheels
1 x Part NM039-Barrel and Cradle For 1" Blind
1 x Part NM036- Right Side 1 Inch Tilter
1 x YNP01D-Right Del Mar Green Lock
1 x Part NR09C #10 Plastic Connector( Qty. 20 per Order)
1 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x Part NM034- 1" Tilter Fit Hex Rod With Groove
1 x Part NR08 Plastic Sew On Ring 5/8"
1 x ANP10-Hunter Douglas Large Pleat Cord Lock Right, Use 0.9mm Cord
1 x Part NV005B- Vertical End Cap For Hunter Douglas
1 x Part NV005- Carrier Uses Plastic Link
1 x Part NM003 -Wand Tilter For 2 Inch Blind
1 x Part NM003D Wand Tilter For 3" Slat, Fits Square Rod
1 x Part NM003BB- Hunter Douglas (Compatible Part Ships Out)
1 x Part NV023A-(Qty 3)Decomatic Vertical Carrier
1 x Part NP37A- Motor Lock
1 x Part NM038C - 1' Wand Tilter
1 x Part NM043A-Loop Type Wand Tilter
1 x Part NV031B-Metal Link For 3dayblind Carrier
1 x Part NP36C Off White Plastic Plug
1 x Part NV037 Click On Picture For Information(Qty 5 Per Order)
1 x Part- NM084 White Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NP66L Black Motor Left Side (no returns or refunds)
1 x Part NM015- White Wand Tilter For One Inch blind
1 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x YNP01EF-Metal Cord Guide
1 x Part NR09A Small Cord Guide (screws not included)
1 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
1 x Part NM041J Valance Clip 3.5" (Quantity 15)
1 x Part NV021B - Decomatic Black Lock Washer
1 x Part NP23 (Qty 1) Clutch Cover
1 x Part NM038D - 1" Wand Tilter
1 x Part NP10A- Cord Guide 1 3/4" Wide
1 x Part NV001-100 Clips(no returns)
1 x Part NR02- (Qty 6) Roman Shade Lock- 3 guides(screws not include
$1,363.12
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts