$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
1 x Part NM038C - 1' Wand Tilter
1 x Part- NM009H2 -Wand Tip and Hook (Quantity 12)
1 x Part NM041F-Right Side Replaces The Left Side (Quantity 15)
1 x Part NM003 -Wand Tilter For 2 Inch Blind
1 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
1 x Part NP16B Tape Only (160 feet)
1 x Part NP06A- Left Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part NM040J- Valance Clip (Quantity 15)
1 x Part NM041G Valance Clip 2" Tall (Quantity 15)
1 x Part NP23 (Qty 1) Clutch Cover
1 x Part NM004A-Discontinued (new version will ship out)
1 x Part NM012A Cord Tilter High Profile
1 x Part NM013D- Compatible Tilter Ships Out
1 x Part NP39- Tan Motor For Cordless Blind(no returns)
1 x Part NP72I White Right Cord Clutch Cover
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NP05A Cord Wedge
1 x ANP10A - White Right Side Body Cover
1 x Part NM031D- 1" Wand Tiler With Clutch
1 x Part NP63L Green Motor Left Side (no returns or refunds)
1 x Part- NM084 White Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM012- 2" Wand Tilter For Low Profile
1 x Part NM012C-2" (Discontinued) A Compatible Tilter Will Ship Out
1 x YNP01EF-Metal Cord Guide
1 x Part NM038E - 1" Wand Tilter
1 x Part NM013- 2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NP06D-Left Side Side Large Cord Lock, Uses 1.2mm Cord
1 x Part NP07A Wear Bar
1 x Part NP65L Blue Motor Left Side (no returns or refunds)
1 x Part NM003BB- Hunter Douglas (Compatible Part Ships Out)
1 x Part NP06- Right Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part NM041E Clip For 2 1/2" Valance (Quantity 15)
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap
1 x Part- NM019C (Qty. 4) White Plastic Wand 36"(no returns)
1 x Part NP07- Cord Guide 1 1/4" Wide
1 x Part NP16A- Plug For Easy Rise Tape
1 x Part NM046-Discontinued (A Compatible Ships) (Quantity 10)
1 x Part NP36C Off White Plastic Plug
1 x Part NP36A Clear Plastic Plug
1 x ANP11-Hunter Douglas Small Pleat Left Cord Lock, Use 0.9mm Cord
1 x Part NM013B-2" Wand Tilt Fits Hex Rod(new version will ship out)
1 x Part NP71 Off White Left Cord Clutch Cover
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x Part NM004A-Hunter Douglas Cord Tilter
1 x ANP12-Hunter Douglas Small Pleat Cord Lock Right Side, Use 0.9mm
1 x Part- NM009C3 Clear Plastic Tassel 1 1/4" Tall(10 per order)
1 x Part NM005D Cord Tilter For 2" Blind
1 x YNP01C Left Side Cord lock (White only)
1 x Part NM005B Cord Tilter Fits Hex Rod
1 x ANP11A - Vanilla Left Side Lock Body
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM038D - 1" Wand Tilter
1 x Part NP71A-Left Side Blue Cord Clutch
1 x Part NM008 - Wand Tilter
1 x Part NP72F-Vanilla Left Side End Cap
1 x Part NM027A- 2" Tilter Fits Square Rod-Metal Stem
1 x Part- NM083 Oak Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x ANP11B - White Left Side Lock Body
1 x YNP01B Left Side Cord lock (White only)
1 x Part NM041F Valance Clip 1 3/4" Tall (Quantity 15)
1 x Part NP72H-White Right Side End Cap
1 x Part NM046- Craddle For Low Profile (Quantity 10)
1 x Part- NM009B White Wood Tassel 1 1/4" Tall (20 per order)
1 x Part NM041A Clip For 2 1/2" Wood Valance (Quantity 15)
1 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
1 x Part NM040H- Valance Clip (Quantity 14)
1 x Part NP72B-Right Side Blue Cord Clutch
1 x Part NM005A Cord Tilter Fits Hex Rod
1 x Part NP75 White Motor (no returns)
1 x Part- NM009H1 -Wand Tip (Quantity 12)
1 x Part NP38- Gray Motor For Cordless Blind(no returns)
1 x Part NM042- White Wand Tilter 2" With Hook
1 x YNP01A Right Side Cord lock (White Only)
1 x Part NP03H- Cord Tassel Clear Plastic 3/4" Tall
1 x Part NV029-(Qty 7) Valance Clip Fits On Top Of A 1 7/8" Headrai
1 x Part NV017A-Open Bead For 2.2mm Vertical Cord
1 x Part NV012B1- Plastic Link
1 x Part NV010- Vertical Track Sprocket (Qty 1)
1 x Part NV016-2.2 mm Track Cord (100 Feet per Order)
1 x Part NV021- Lock Washer
1 x Part 34 Installation Bracket
1 x #1.2 mm cord size (click here for more information)
1 x Part NV005B- Vertical End Cap For Hunter Douglas
1 x Part 33A Vertical Track Bracket
1 x #2.7mm-B-Oak Blind Cord (50 Feet Per Order)
1 x Part SVS92 White End Cap(1 pair)
1 x Part NV027-#10 Vertical Chain Connector
1 x Part NV021B - Decomatic Black Lock Washer
1 x Part 08- Silhouette Installation Bracket (screws not included)
1 x Part 36 Pleated Shade Bracket (1)
1 x Part NV003- Graber Small Vertical Track End Control
1 x Part 25 Small Installation Backet (screws not included)
1 x #1.4mm-F-Oak Blind Cord(75 Feet Per Order)
1 x Part NV029D (Qty 3) Valance Clip
1 x Part NV014B- Clear Plastic Slat Repair Tab
1 x Part NV002A-(Qty 5) Carrier With Plastic Scissors Black Wheels
1 x Part NV015- Top Plug For Vertical Fabric
1 x Part NV002-Discontinued (A Compatible Control) Will Ship Out
1 x Part NV029A (Qty 3) Valance clip
1 x Part NV030A- Valance Corner
1 x Part NV002A2 (Qty 5) Carrier With Plastic Scissors Blue Wheels
1 x Part NV013-(Qty 2) Vertical Cord Hold Down (screws not included)
1 x #2.7mm-E-Dark Walnut Cord(50 Feet Per Order)
1 x Part 32A Vertical Track Bracket
1 x Part 26 Large Installation Bracket (screws not included)
1 x Part NV031B-Metal Link For 3dayblind Carrier
1 x #2.7 mm cord size (click here for more information)
1 x Part NR02- (Qty 6) Roman Shade Lock- 3 guides(screws not include
1 x Part NV003C- Clear Plastic Vertical Slat Fabric Insert
1 x Part NV004A- Plastic Link For Carrier 3 5/16" Long
1 x Part NV030- Valance Corner
1 x Part NV002D - Wand Control
1 x Part NV021a- Vertical Stopper
1 x Part SVS6 White End Cap(1 pair)
1 x Part 07A- (Qty 1) Pleated Shade Bracket (screws not included)
1 x #1.4mm-B1-Alabaster Blind Cord (75 Feet Per Order)
1 x Part NV014- Silver Vertical Repair Clip
1 x Part NV002 Vertical Track End Control
1 x Part NR09B #10 Plastic Beaded Chain (100 Feet per Order)
1 x Part NV028-(Qty 7) Clip Fits 1 1/2" Headrail
1 x Part NV014A- White Vertical Repair Clip
1 x Part NV029F-(Qty 5) Valance Clip 1 1/2" Rail
1 x Part NV038 Vertical Track Carrier (Qty 1 Per Order)
1 x Part NV001-100 Clips(no returns)
1 x Part NV026- #10 Vertical Chain $.99 Per Foot
1 x Part NV036A Click On Picture For Information (Qty 5 Per Order)
1 x #1.4mm-HH-Dark Walnut Cord(75 Feet Per Order)
1 x Part NV031 -Replacement Stem (Qyt 1 Stem Only)
1 x Go To Roman And Woven Wood Parts
1 x Part NV023- Vertical End Cap
1 x Part NV001A Fabric Weight
1 x Part NV009- Vertical Track Laserlite Barrel For End Control
1 x Part NV034 Luminette End Control Stem and Gear
1 x Part NV005- Carrier Uses Plastic Link
1 x Part NV002B Vertical Track End Control Notchless
1 x Part NV037 Click On Picture For Information(Qty 5 Per Order)
1 x Part NV002A3 (Qty 2) Carrier With Plastic Scissors White Wheels
1 x Part NR09 Cord Guide (screws not included)
1 x Part NV009A- Vertical End Control
1 x Part NV036 Click On Picture For Information (Qty 4 Per Order)
1 x Part NV029G-(Qty 4) Valance Clip
1 x #1.4mm-A-White Blind Cord (75 Feet Per Order)
1 x Part NV007- Vertical Track Kirsch Carrier(Salvaged Part)
1 x Part 07- Installation Bracket (screws not included)
1 x Part NV029J Valance Clips 3 per Order
1 x #0.9mm-G-Pink Shade Cord(75 Feet Per Order)
1 x Part NV008- Vertical Track Kirsch Carrier For Vinyl Vanes
1 x Part 30A Brown Bracket LP (screws not included)
1 x Part NV023A-(Qty 3)Decomatic Vertical Carrier
1 x Part NV004- (Qty. 50)Vertical Slat Fabric Insert 3 3/8" Wide
1 x #2.7mm-A11- Alabaster Blind Cord (50 Feet Per Order)
$1,729.90
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts