$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
1 x YNP01C Left Side Cord lock (White only)
1 x #1.8mm-C-Vanilla Blind Cord (75 Feet Per Order)
1 x Part NM006-Not Available(A Compatible Tilter) will ship out
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap
1 x #0.9mm-A-White Pleated Shade Cord-(75 Feet Per Order)
1 x YNP01EF-Metal Cord Guide
1 x Part NV003- Graber Small Vertical Track End Control
1 x Part NM013D Wand Tilter
1 x Part- NM084 White Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NP16A- Plug For Easy Rise Tape
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NV002B Vertical Track End Control Notchless
1 x Part NM027- Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM043A-Loop Type Wand Tilter
1 x Part NM041F Valance Clip 1 3/4" Tall (Quantity 15)
1 x Part NM036- Right Side 1 Inch Tilter
1 x Part NM037 Cord Tilter For 1" Blind
1 x Part NP10A- Cord Guide 1 3/4" Wide
1 x Part NV026- #10 Vertical Chain $.99 Per Foot
1 x Part NV008- Vertical Track Kirsch Carrier For Vinyl Vanes
1 x Part 07A- (Qty 1) Pleated Shade Bracket (screws not included)
1 x Part NM013D- Compatible Tilter Ships Out
1 x Part NV004B- Plastic Link For Carrier 3 5/8" Long
1 x Part NV029J Valance Clips 3 per Order
1 x #0.9mm-C-Vanilla Shade Cord(75 Feet Per Order)
1 x Part NM039-Barrel and Cradle For 1" Blind
1 x Part NM004A-Hunter Douglas Cord Tilter
1 x Part NV002D - Wand Control
1 x Part NV002-Discontinued (A Compatible Control) Will Ship Out
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
1 x #0.9mm-F11-Smokey Gray Shade Cord (75 Feet Per Order)
1 x ANP10A - White Right Side Body Cover
1 x Part NM012C- Discontinued New Version Will Ship Out
1 x Part NM035- 1 Inch Wand Tilter Left Side
1 x Part- NM009C3 Clear Plastic Tassel 1 1/4" Tall(10 per order)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x #1.2mm-A-White Blind Cord (75 Feet Per Order)
1 x Part NV002A-(Qty 5) Carrier With Plastic Scissors Black Wheels
1 x Part 26 Large Installation Bracket (screws not included)
1 x Part NP06D-Left Side Side Large Cord Lock, Uses 1.2mm Cord
1 x Part NP72D-Off White Right Side End Cap
1 x #White CordLoop A - 6 Feet Tall -Click Here For More Information
1 x ANP12-Hunter Douglas Small Pleat Cord Lock Right Side, Use 0.9mm
1 x Part NM032A Replacement Hook 1" Tall (Quantity10)
1 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NP37A- Motor Lock
1 x Part NP16B Tape Only (160 feet)
1 x YNP01E-Del Mar Vanilla Left Side
1 x Part NM008 - Wand Tilter
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x #1.4mm-B1-Alabaster Blind Cord (75 Feet Per Order)
1 x Part NP76 Grey Motor (no returns)
1 x Part 34 Installation Bracket
1 x Part NP03E-Clear Plastic Stopball (Qty 10)
1 x Part NV003B- (Qty 10) Graber Small Vertical Track Carrier
1 x Part NV038 Vertical Track Carrier (Qty 1 Per Order)
1 x Part NM046- Craddle For Low Profile (Quantity 10)
1 x Part- NM009H1 -Wand Tip (Quantity 12)
1 x Part 08- Silhouette Installation Bracket (screws not included)
1 x Part NM013- 2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NR03- (Qty2)Clear Plastic Bar Eyelet
1 x Part NP39- Tan Motor For Cordless Blind(no returns)
1 x Part- NM009H2 -Wand Tip and Hook (Quantity 12)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NP23 (Qty 1) Clutch Cover
1 x Part NM041J Valance Clip 3.5" (Quantity 15)
1 x Part- NM081 Dark Walnut Plug For 3/8" Hole(Qty. 20 Plugs)
1 x Part NM041F-Right Side Replaces The Left Side (Quantity 15)
1 x #V013A (Qty 25) Cord Holder (screws not included)
1 x Part NP72H-White Right Side End Cap
1 x Part NV034 Luminette End Control Stem and Gear
1 x Part NM015- White Wand Tilter For One Inch blind
1 x Part NV029A (Qty 3) Valance clip
1 x #2.7mm-A3- Sand Blind Cord (50 Feet Per Order)
1 x Part NV021B - Decomatic Black Lock Washer
1 x Part NV031 -Replacement Stem (Qyt 1 Stem Only)
1 x Part- NM009C1 Medium Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x YNP01A Right Side Cord lock (White Only)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
$958.22
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts