$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
1 x Part NP72J White Left Cord Clutch Cover
1 x Part NP07- Cord Guide 1 1/4" Wide
1 x Part 07- Installation Bracket (screws not included)
1 x Part NP06C- Right Side Large Cord Lock, Use 1.2mm Cord
1 x Part NP72I White Right Cord Clutch Cover
1 x YNP01C Left Side Cord lock (White only)
1 x YNP01E-Del Mar Vanilla Left Side
1 x Part NP39- Tan Motor For Cordless Blind(no returns)
1 x Part 32A Vertical Track Bracket
1 x Part NP03E-Clear Plastic Stopball (Qty 10)
1 x ANP11-Hunter Douglas Small Pleat Left Cord Lock, Use 0.9mm Cord
1 x Part NP72E Plastic Threaded Rod 4 1/2" Long
1 x Part NP72F-Vanilla Left Side End Cap
1 x Part NP27-Cream Left Side Cord Lock, Uses 1.2mm Cord
1 x YNP01EF-Metal Cord Guide
1 x Part NP06- Right Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x ANP11B - White Left Side Lock Body
1 x Part 36 Pleated Shade Bracket (1)
1 x Part NP72B-Right Side Blue Cord Clutch
1 x Part NP65L Blue Motor Left Side (no returns or refunds)
1 x Part 07A- (Qty 1) Pleated Shade Bracket (screws not included)
1 x Part NP72H-White Right Side End Cap
1 x Part NP36B White Plastic Plug
1 x Part NP67A- Right Side White Motor (no returns or refunds)
1 x ANP10A - White Right Side Body Cover
1 x Part 25 Small Installation Backet (screws not included)
1 x Part NP10A- Cord Guide 1 3/4" Wide
1 x Part NP36C Off White Plastic Plug
1 x Part NP07A Wear Bar
1 x Part 30A Brown Bracket LP (screws not included)
1 x Part 26 Large Installation Bracket (screws not included)
1 x Part NP05A Cord Wedge
1 x Part NM038D - 1" Wand Tilter
1 x Part NR01 (Qty10)Brown Cord Lock 3 Guides (screws not included)
1 x Part NV034 Luminette End Control Stem and Gear
1 x Part NM006- Not Available (Compatible Tilter Will Ship Out)
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x Part NV004A- Plastic Link For Carrier 3 5/16" Long
1 x Part NM027- Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM003B 2" Wand Tilter Zinc Loop
1 x Part- NM009H1 -Wand Tip (Quantity 12)
1 x Part NM041E Clip For 2 1/2" Valance (Quantity 15)
1 x Part- NM084 White Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x #0.9mm-B1-Alabaster Shade Cord(75 Feet Per Order)
1 x Part NV030A- Valance Corner
1 x Part NR09C #10 Plastic Connector( Qty. 20 per Order)
1 x Part NV004- (Qty. 50)Vertical Slat Fabric Insert 3 3/8" Wide
1 x #2.7mm-A11- Alabaster Blind Cord (50 Feet Per Order)
1 x Part NM013D Wand Tilter
1 x Part NV003- Graber Small Vertical Track End Control
1 x Part NV014B- Clear Plastic Slat Repair Tab
1 x Part NM012A Cord Tilter High Profile
1 x Part NM040H- Valance Clip (Quantity 14)
1 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
1 x #1.4mm-H-Medium Walnut Cord(75 Feet Per Order)
1 x Part NM046- Craddle For Low Profile (Quantity 10)
1 x Part NM013B-2" Wand Tilt Fits Hex Rod(new version will ship out)
1 x Part NM003 -Wand Tilter For 2 Inch Blind
1 x Part NV015- Top Plug For Vertical Fabric
1 x Part- NM081 Dark Walnut Plug For 3/8" Hole(Qty. 20 Plugs)
1 x Part NM031D- 1" Wand Tiler With Clutch
1 x #2.7mm-D-Medium Walnut Cord (50 Feet Per Order)
1 x #1.8mm-D-Sand Blind Cord(75 Feet Per Order)
1 x Part NV014A- White Vertical Repair Clip
1 x Go To Roman And Woven Wood Parts
1 x Part NM040J- Valance Clip (Quantity 15)
1 x Part NV029H-(Qty 5) Valance Clip
1 x Part NV002A2 (Qty 5) Carrier With Plastic Scissors Blue Wheels
1 x Part NM005D Cord Tilter For 2" Blind
1 x #0- 0.9mm Cord Size and Safety (click here for more information
1 x Part NM041F-Right Side Replaces The Left Side (Quantity 15)
1 x #1.2 mm cord size (click here for more information)
1 x #0.9mm-F11-Smokey Gray Shade Cord (75 Feet Per Order)
1 x Part NV002A3 (Qty 2) Carrier With Plastic Scissors White Wheels
1 x #0.9mm-N-Dark Brown Cord (75 Feet Per Order)
1 x Part NM043B-(Compatible Tilter Will Ship Out) Select Blinds Tilt
1 x #0.9mm-D-Sand Shade Cord(75 Feet Per Order)
1 x Part NM012- 2" Wand Tilter For Low Profile
1 x Part SVS92 White End Cap(1 pair)
1 x Part NV029J Valance Clips 3 per Order
1 x Part NV023C-(Qty 2)Vertical Clip And Base
1 x Part NM003D Wand Tilter For 3" Slat, Fits Square Rod
1 x #1.8mm-B1-Alabaster Blind Cord(75 Feet Per Order)
1 x Part- NM016a-(Qty. 4)Clear Plastic Wand 30"(no returns)
1 x Part- NM009C Dark Brown Wood Tassel 1 1/4" Tall(20 per order)
$839.46
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts